Autobio LUmo is a state of the art microplate luminometer, designed to meet the demanding requirements of today’s microplate based, glow luminescence applications.
High sensitivity 1 x 10-23 mole HRP
… allows detection of lower analyte concentrations, earlier diagnosis of diseases and efficient tracing of treatments.
Large dynamic range 0 to 1.6 x 109 RLU
… significantly increases assay linearity and enables reliable interpretation of very low and very high analyte concentrations in one test run without additional sample dilution.
Very low crosstalk
LUmo incorporates a sophisticated, adaptive positioning system, keeping the detector as close as possible above the sample to eliminate instrument related crosstalk and make optimum use of LUmo‘s high sensitivity and dynamic.
It takes typically less than 40 seconds to read a 96-well plate at 0.1 sec integration time. With fast Luminol-based reaction systems, high reading speed greatly improves assay precision across a plate.
300 - 650nm
Dynamic / Indication Range
0 - 1.600.000.000 RLU
RLU (Relative Light Units)
Sensitivity at 545nm
1 x 10-23 mole HRP
< 1 x 10-7 (typical)
typically <40 seconds at 0.1 sec. integration time for a 96-well plate
0.1 sec to 10 sec in increments of 0.1sec
96-well and 48-well (4x12) microplates, max. height 15.2 mm
33.5cm x 20.5cm x 47.0 cm (w x h x l)
100-240VAC ±10%, 47-63Hz
Serial Interface RS232 (9-pin), USB 2.0
Temperature: 10°C to 40°C
Humidity: 15%-75% RH non-condensing
Temperature: -10°C to 50°C Humidity: <95% RH non-condensing
Scope of supply
Instrument, power supply, power cable, dustcover, serial cable, USB cable, AUTOsoft - Autobio Control and Evaluation Software (Windows®) and user manual on CD